It is the cache of ${baseHref}. It is a snapshot of the page. The current page could have changed in the meantime.
Tip: To quickly find your search term on this page, press Ctrl+F or ⌘-F (Mac) and use the find bar.

Preparation of LaFeO3 Porous Hollow Nanofibers by Electrospinning | Dong | International Journal of Chemistry

Preparation of LaFeO3 Porous Hollow Nanofibers by Electrospinning

Xiangting Dong, Jinxian Wang, Qizheng Cui, Guixia Liu, Wensheng Yu

Abstract


Polyvinyl Pyrrolidone (PVP)/[La(NO3)3+Fe(NO3)3] composite nanofibers were fabricated by electrospinning. SEM
micrographs indicated that the surface of the prepared composite fibers was smooth, and the diameters of the nanofibers
was in the range of 1-3μm. XRD analysis revealed that the composite nanofibers were amorphous in structure. LaFeO3
nanofibers were fabricated by calcination of the PVP/[La(NO3)3+Fe(NO3)3] composite fibers. The diameters of LaFeO3
nanofibers were smaller than those of the relevant composite fibers. The surface of the LaFeO3 nanofibers became
coarse with the increase of calcination temperatures. LaFeO3 hollow-centered and porous nanofibers formed by
nanoparticles were acquired when firing temperature was 600-800ºC. SEM images indicated that the diameters of the
synthesized LaFeO3 nanofibers ranged from 500 to 800nm, and their lengths were greater than 100????m. XRD analysis
revealed that LaFeO3 nanofibers were orthorhombic in structure with space group Pn*a. Possible formation mechanism
for LaFeO3 nanofibers was preliminarily proposed.

Full Text: PDF

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

International Journal of Chemistry   ISSN 1916-9698 (Print)   1916-9701 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.