It is the cache of ${baseHref}. It is a snapshot of the page. The current page could have changed in the meantime.
Tip: To quickly find your search term on this page, press Ctrl+F or ⌘-F (Mac) and use the find bar.

Thermal Science - scientific journal [paper: DEVELOPING OF A NEW COMPREHENSIVE SPARK IGNITION ENGINES CODE FOR HEAT LOSS ANALYSIS WITHIN COMBUSTION CHAMBER WALLS]

THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

DEVELOPING OF A NEW COMPREHENSIVE SPARK IGNITION ENGINES CODE FOR HEAT LOSS ANALYSIS WITHIN COMBUSTION CHAMBER WALLS

ABSTRACT
The objective of this work is to develop the existing a zero-dimensional model named ODES to provide detailed insights into the internal process of the modern high speed spark ignition engines. Therefore, it has been concentrated on the development of new sub models for incorporation in an extended form of ODES, as follows: - the existing semi-empirical combustion model has been replaced by a new comprehensive model, which is based on the turbulent flame speed in the combustion chamber. - the existing three wall heat transfer model has been replaced by a new one in which, the combustion chamber is divided in to three zones including cylinder head, cylinder wall, and piston head. The steady-state heat transfer equation is solved through finite difference method with replaced boundary and initial conditions. The results gave the temperature distribution of combustion chamber walls. The rate of heat losses from combustion chamber to the coolant is calculated by using the mean temperature of each part. The code has been extensively validated with respect to performance and heat transfer against experimental results obtained on XU7JP spark ignition engine with two kinds of fuel, gasoline and compresed natural gas and gave good agreement with available experimental.
KEYWORDS
PAPER SUBMITTED: 2010-03-16
PAPER REVISED: 2010-05-25
PAPER ACCEPTED: 2010-10-19
DOI REFERENCE: 10.2298/TSCI10041013K
THERMAL SCIENCE YEAR 2010, VOLUME 14, ISSUE 4, PAGES [1013 - 1025]
  1. Olikara, C., Borman, G., A Computer Program for Calculating Properties of Equilibrium Combustion Products with Some Applications on IC Engines, SAE paper 750468, 1975
  2. Beratta, G. P., Rashidi, M., Keck, J. C., Turbulent Flame Propagation and Combustion in Spark Ignition Engines, Combust Flame, 52 (1983), pp. 217-245
  3. Kodah, Z. H., et al., Combustion in a Spark-Ignition Engine, Applied Energy, 66 (2000), 3, pp. 237-250
  4. Abd Alla, G. H., Computer Simulation of a Four Stroke Spark Ignition Engine, Energy Conversion and Management, 43 (2002), 8, pp. 1043-1061
  5. Bayraktar, H., Durgun, O., Development of an Empirical Correlation for Combustion Durations in Spark Ignition Engines, Energy Conversion Management, 45 (2004), 9-10, pp. 1419-1431
  6. Tomi}, M. V., et al., A Quick Simplified Approach to the Evaluation of Combustion Rate from an Internal Combustion Engine Indicator Diagram, Thermal Science, 12 (2008), 1, pp. 85-102
  7. Tirkey, J. V., Gupta, H. N., Shukla, S. K., Integrated Gas Dynamic and Thermodynamic Computational Modeling of Multicylinder 4- Stroke Spark Ignition Engine Using Gasoline as a Fuel, Thermal Science, 13 (2009), 3, pp. 113-130
  8. Namazian, M., et al., Schlieren Visualization of the Flame and Density Fields in the Cylinder of a Spark-Ignition Engine, SAE paper 800044, 1980, pp. 276-303
  9. Tagalian, J., Heywood, J. B., Flame Initiation in a Spark-Ignition Engine, Combust Flame, 64 (1986), 2, pp. 243-246
  10. Gatowski, J. A., Heywood, J. B., Deleplace, C., Flame Photographs in a Spark-Ignition Engine, Combust Flame, 56 (1984), 1, pp.71-81
  11. Thomas, A., Flame Development in Spark-Ignition Engines, Combust Flame (1983), 50, pp. 305-322
  12. Lucas, G. G., Brunt, M. F. J., The Effect of Combustion Chamber Shape on the Rate of Combustion in a Spark Ignition Engine, SAE paper 820165, 1982, pp.714-729
  13. Poulos, S. G., Heywood, J. B., The Effect of Chamber Geometry on Spark-Ignition Engine Combustion, SAE paper 830334, 1983, pp. 1106-1129
  14. Basso, A., Optimization of Combustion Chamber Design for Spark Ignition Ignitions, SAE paper 840231, 1984
  15. Hano, R., Isuyoshi, A., Numerical Simulation of Two-Dimensional Combustion Process in a Spark Ignition Engine with a Prechamber Using k-e Turbulence Model, SAE paper 890669, 1989
  16. Borman, G., Nishiwaki, K., Internal Combustion Engine Heat Transfer, Progress in Energy and Combustion Science, 13 (1987), 1, pp. 1-46
  17. Yoo, S. J., Kim, E. S., Study of In-Cylinder Local Heat Transfer Characteristic, of a Spark Ignition Engine, SAE paper 931981, 1993, pp. 1-11
  18. Angelberger, C., Poinsot, T., Delhaye, B., Improving Near-Wall Combustion and Wall Heat Transfer Modeling in SI Engines Computations, SAE paper 972881, 1997, pp. 113-130
  19. Urip, E., et al., Numerical Investigation of Heat Conduction with Unsteady Thermal Boundary Condition for Internal Combustion Engine Application, Proceeding on CD, ASME International Mechanical Engineering Congress, Anaheim, Cal., USA, 2004
  20. Oguri, T., On the Coefficient of Heat Transfer between Gases and Cylinder Walls of the Spark-Ignition Engine, Bull. JSME, (1960), 3-11, pp. 363-369
  21. Alkidas, A. C., Heat Transfer Characteristics of a Spark-Ignition Engine, ASME J. Heat Transfer, 102 (1980), 2, pp. 189-193
  22. Alkidas, A. C., Myers, J. P., Transient Heat-Flux Measurements in the Combustion Chamber of a Spark-Ignition Engine, ASME J. Heat Transfer, 104 (1982), 1, pp. 62-67
  23. Shayler, P. J., May, S. A., Ma, T., The Determination of Heat Transfer from the Combustion Chambers of SI Engines, SAE paper 931131, 1993
  24. Wallace, F. J., Presentation of Simulation Package ODES at Universally Internal Combustion Engine Group (UNICEG) Meeting, University College London, 1993
  25. Khalilarya, S., An Extended Zero-Dimensional Simulation for HPCR Diesel Engine, Ph. D. thesis, Bath University, Bath, UK, 2002
  26. Wallace, F. J., ODES Data Input Description, Bath University, Bath, UK, 1993
  27. Bayraktar, H., Durgun, O., Mathematical Modeling of Spark-Ignition Engine Cycles, Energy Sour., 7 (2003), 25, pp. 651-66
  28. Kreiger, R. B., Borman, G. L., The Computation of Apparent Heat Release for Internal Combustion Engines, ASME paper 66-WAI/GP-4, 1966
  29. Taylor, C. F., The Internal Combustion Engine in Theory and Practice, vol. 2, MIT Press, Cambridge, Mass., USA, 1968
  30. Heywood, J. B., Internal Combustion Engine Fundamentals, McGraw-Hill, New York, USA, 1988
  31. Nusselt, W., Heat Transfer in Internal Combustion Engines (in German), Ingenieur, 67 (1923), pp. 692-708
  32. Annand, W. J. D., Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines, Proceedings of the Institution of Mechanical Engineers, 1963, No. 177-36, pp. 973-990
  33. Eichelberg, G., Some New Investigations on Old Combustion Engine Problems, Engineering (1939), 148, pp. 463-547
  34. Woschni, G., A University Applicable Equation for Instantaneous Heat Transfer Coefficient in Internal Combustion Engines, SAE paper 670931, SAE Trans, Vol. 76 (1976)
  35. Benson, R. S., Horlock, J. H., Winterbone, D. E., The Thermodynamics and Gas Dynamics of Internal Combustion Engines, vol. 1, Clarendon Press, Oxford, UK, 1982
  36. Blizard, N. C., Keck, J. C., Experimental and Theoretical Investigation of Turbulent Burning Model for Internal Combustion Engines, SAE paper 740191, SAE Trans., Vol. 83 (1974)
  37. Tabaczynski, R. J., Ferguson, C.R., Ranha Krishnan, K., A Turbulent Entrainment Model for Spark Ignition Engine Combustion, SAE paper 770647, SAE Trans., Vol. 86 (1977)
  38. Polous, S. G., Heywood, J. B., The Effect of Chamber Geometry on Spark-Ignition Engine Combustion, SAE paper 830334, 1983
  39. Tennekes, H., Lumley, J. L., A First Course in Turbulence, MIT Press, Cambridge, Mass., USA, 1972
  40. Heywood, J. B., Internal Combustion Engine Fundamentals, McGraw-Hill, New York, USA, 1988
  41. Hoffmann, K. A., Chain, S. T., Computational Fluid Dynamics for Engineers, McGraw-Hill, New York, USA, 1995
  42. Churchill, S. W., Bernstein, M., A Correlation Equation for Forced Convection from Gases and Liquids to a Circular Cylinder in Cross Flow, J. Heat Transfer, 99 (1977), 2, pp.300-306
  43. ***, Iranian Power Training Company (IPCO), www.ip-co.com/
  44. Tennant, C. J., et al., Turbocharging a Bi-Fuel Engine for Performance Equivalent to Gasoline, SAE paper 942003, 1994
  45. Hyun, C. C., et al., Development Work on HMC's Natural Gas-Fueled 1.5 L MPI DOHC Engine, SAE paper 931869, 1993
  46. Ishii, M., et al., Experimental Studies on a Natural Gas Vehicles, SAE paper 942005, 1994